Design and analysis for X band vsat application microstrip patch antenna at 7.5 ghz /
In this research, a compact size and lightweight structure of rectangular microstrip patch antenna operating at 7.5 GHz is presented. This research is proposed to replace the existing parabolic reflector antenna for the VSAT application in terms of portability. The dimension of the proposed antenna...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English |
| 出版: |
Kuala Lumpur :
Kulliyyah of Engineering, International Islamic University Malaysia,
2020
|
| 主题: | |
| 在线阅读: | http://studentrepo.iium.edu.my/handle/123456789/10384 |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | In this research, a compact size and lightweight structure of rectangular microstrip patch antenna operating at 7.5 GHz is presented. This research is proposed to replace the existing parabolic reflector antenna for the VSAT application in terms of portability. The dimension of the proposed antenna is 19.00 mm × 30.55 mm which is compact in size. The simulation of microstrip patch antenna exhibits a good return loss, S11 of -42.09 dB, VSWR of 1.02 and gain of 7.18 dB by using CST Microwave Studio. The proposed antenna have been fabricated by using substrate RT/duroid ® High Frequency 5880 with dielectric of (�������� = ����. ����, tan (����) = ����. ���������������� and t = 1.575mm). Then, the measurement return loss of the antenna prototype is performed using a Vector Network Analyzer, while the radiation patterns are measured in the anechoic chamber. The measurement of the antenna prototype exhibit a return loss, S11 of -30.53 dB, bandwidth of 455MHz, gain of 3.88 dB and efficiency of 68.71%. |
|---|---|
| Item Description: | Abstracts in English and Arabic. "A dissertation submitted in fulfilment of the requirement for the degree of Master of Science (Communication Engineering)." --On title page. |
| 实物描述: | xvii, 87 leaves : colour illustrations ; 30cm. |
| 参考书目: | Includes bibliographical references (leaves 85-87). |