Hydraulic conductivity of laterite soil mix with geopolymer in designing a modified soil liner / Nik Nurul Syuhada Nik Ab Aziz

Soil liners are commonly used in the base of waste containment facilities and it has been used for many years. A low hydraulic conductivity is a key parameter in the design of liner to prevent the downward migration of contaminants into aquifers. The previous studies revealed that the soil liner sho...

وصف كامل

محفوظ في:

التفاصيل البيبلوغرافية
المؤلف الرئيسي:	Nik Ab Aziz, Nik Nurul Syuhada
التنسيق:	أطروحة
اللغة:	English
منشور في:	2018
الموضوعات:	Hydraulic machinery
الوصول للمادة أونلاين:	https://ir.uitm.edu.my/id/eprint/104812/1/104812.pdf
الوسوم:	إضافة وسم لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!

id	my-uitm-ir.104812
record_format	uketd_dc
spelling	my-uitm-ir.1048122024-10-09T06:53:40Z Hydraulic conductivity of laterite soil mix with geopolymer in designing a modified soil liner / Nik Nurul Syuhada Nik Ab Aziz 2018 Nik Ab Aziz, Nik Nurul Syuhada Hydraulic machinery Soil liners are commonly used in the base of waste containment facilities and it has been used for many years. A low hydraulic conductivity is a key parameter in the design of liner to prevent the downward migration of contaminants into aquifers. The previous studies revealed that the soil liner should have a hydraulic conductivity lower than 1x10-9 m/s. Laterite soil is a main material used for soil liner. However, the use of laterite soil associated with difficulties in compacting to achieve the acceptable hydraulic conductivity. It is hypothesized that incorporating fly ash based geopolymer in soil liner would ease compacting and enhance compaction parameters of laterite soil. In this study, laterite soil was modified with chemical stabilizer which is fly ash based geopolymer. Laterite soil was mixed with different percentages of geopolymer which are 5%, 10%, 15% and 20% by weight. The laterite soil was collected at Damansara Perdana area. Sodium hydroxide (NaOH) was purchased from the supplier and the waste material which are fly ash was taken at Kapar Energy Ventures Sdn Bhd, Kapar Selangor. The NaOH in pellets form was added to water in order to obtain the alkali solution and fly ash was added to the solution to form a material in a binder state known as geopolymer. The soil properties were determined by conducting Atterberg limit, particle density, particle size distribution, pH and shrinkage limit test for all soil samples. Compaction test was carried out with three (3) different compaction energy which are Reduced British Standard Level (RBSL), British Standard Light (BSL) and British Standard Heavy (BSH). The hydraulic conductivity of soil was determined by using falling head permeability test subjected to BSL test only. All compacted samples was performed at dry, optimum and at wet of optimum moisture content. The compaction test and falling head permeability test were applied to all soil samples which mix with and without different percentage of geopolymer. The hydraulic conductivity for soil sample that compacted with RBSL test and BSH were determined by using Benson and Trast’s formula. The formula was selected because the hydraulic conductivity values obtained were found to be closest to those obtained from the actual of laboratory works. According to the results, it was found that the soil mixture with 15% of geopolymer gives the best value of maximum dry density, optimum moisture content and hydraulic conductivity of the soil. Subsequently, models of estimating hydraulic conductivity, k from an empirical formula based on soil parameter measured in the laboratory were established. The models were developed by using MINITAB software. There are a few parameters that were used in developing the models. A model was developed based on physical properties parameters to predict the hydraulic conductivity of the modified soil based geopolymer. The accepted zone was also successfully developed corresponding to physical, engineering properties and hydraulic conductivity with respect to different percentage of geopolymer. The soil mix with 15% of geopolymer showed the large area of acceptance zone compared to those made of other percentages of geopolymer. Large area of moisture content was obtained to achieve maximum compaction for the same soil mix. The soil amended with 15% of geopolymer can be compacted using 5% to 15% of water content to produce the required hydraulic conductivity. Further adding geopolymer in the soil mixes was found decreased the hydraulic conductivity of the resulted liner. 2018 Thesis https://ir.uitm.edu.my/id/eprint/104812/ https://ir.uitm.edu.my/id/eprint/104812/1/104812.pdf text en public phd doctoral Universiti Teknologi MARA (UiTM) Faculty of Civil Engineering
institution	Universiti Teknologi MARA
collection	UiTM Institutional Repository
language	English
topic	Hydraulic machinery
spellingShingle	Hydraulic machinery Nik Ab Aziz, Nik Nurul Syuhada Hydraulic conductivity of laterite soil mix with geopolymer in designing a modified soil liner / Nik Nurul Syuhada Nik Ab Aziz
description	Soil liners are commonly used in the base of waste containment facilities and it has been used for many years. A low hydraulic conductivity is a key parameter in the design of liner to prevent the downward migration of contaminants into aquifers. The previous studies revealed that the soil liner should have a hydraulic conductivity lower than 1x10-9 m/s. Laterite soil is a main material used for soil liner. However, the use of laterite soil associated with difficulties in compacting to achieve the acceptable hydraulic conductivity. It is hypothesized that incorporating fly ash based geopolymer in soil liner would ease compacting and enhance compaction parameters of laterite soil. In this study, laterite soil was modified with chemical stabilizer which is fly ash based geopolymer. Laterite soil was mixed with different percentages of geopolymer which are 5%, 10%, 15% and 20% by weight. The laterite soil was collected at Damansara Perdana area. Sodium hydroxide (NaOH) was purchased from the supplier and the waste material which are fly ash was taken at Kapar Energy Ventures Sdn Bhd, Kapar Selangor. The NaOH in pellets form was added to water in order to obtain the alkali solution and fly ash was added to the solution to form a material in a binder state known as geopolymer. The soil properties were determined by conducting Atterberg limit, particle density, particle size distribution, pH and shrinkage limit test for all soil samples. Compaction test was carried out with three (3) different compaction energy which are Reduced British Standard Level (RBSL), British Standard Light (BSL) and British Standard Heavy (BSH). The hydraulic conductivity of soil was determined by using falling head permeability test subjected to BSL test only. All compacted samples was performed at dry, optimum and at wet of optimum moisture content. The compaction test and falling head permeability test were applied to all soil samples which mix with and without different percentage of geopolymer. The hydraulic conductivity for soil sample that compacted with RBSL test and BSH were determined by using Benson and Trast’s formula. The formula was selected because the hydraulic conductivity values obtained were found to be closest to those obtained from the actual of laboratory works. According to the results, it was found that the soil mixture with 15% of geopolymer gives the best value of maximum dry density, optimum moisture content and hydraulic conductivity of the soil. Subsequently, models of estimating hydraulic conductivity, k from an empirical formula based on soil parameter measured in the laboratory were established. The models were developed by using MINITAB software. There are a few parameters that were used in developing the models. A model was developed based on physical properties parameters to predict the hydraulic conductivity of the modified soil based geopolymer. The accepted zone was also successfully developed corresponding to physical, engineering properties and hydraulic conductivity with respect to different percentage of geopolymer. The soil mix with 15% of geopolymer showed the large area of acceptance zone compared to those made of other percentages of geopolymer. Large area of moisture content was obtained to achieve maximum compaction for the same soil mix. The soil amended with 15% of geopolymer can be compacted using 5% to 15% of water content to produce the required hydraulic conductivity. Further adding geopolymer in the soil mixes was found decreased the hydraulic conductivity of the resulted liner.
format	Thesis
qualification_name	Doctor of Philosophy (PhD.)
qualification_level	Doctorate
author	Nik Ab Aziz, Nik Nurul Syuhada
author_facet	Nik Ab Aziz, Nik Nurul Syuhada
author_sort	Nik Ab Aziz, Nik Nurul Syuhada
title	Hydraulic conductivity of laterite soil mix with geopolymer in designing a modified soil liner / Nik Nurul Syuhada Nik Ab Aziz
title_short	Hydraulic conductivity of laterite soil mix with geopolymer in designing a modified soil liner / Nik Nurul Syuhada Nik Ab Aziz
title_full	Hydraulic conductivity of laterite soil mix with geopolymer in designing a modified soil liner / Nik Nurul Syuhada Nik Ab Aziz
title_fullStr	Hydraulic conductivity of laterite soil mix with geopolymer in designing a modified soil liner / Nik Nurul Syuhada Nik Ab Aziz
title_full_unstemmed	Hydraulic conductivity of laterite soil mix with geopolymer in designing a modified soil liner / Nik Nurul Syuhada Nik Ab Aziz
title_sort	hydraulic conductivity of laterite soil mix with geopolymer in designing a modified soil liner / nik nurul syuhada nik ab aziz
granting_institution	Universiti Teknologi MARA (UiTM)
granting_department	Faculty of Civil Engineering
publishDate	2018
url	https://ir.uitm.edu.my/id/eprint/104812/1/104812.pdf
_version_	1818588120838307840

Hydraulic conductivity of laterite soil mix with geopolymer in designing a modified soil liner / Nik Nurul Syuhada Nik Ab Aziz

مواد مشابهة