Hybrid P3HT : graphene nanocomposite as an active layer in polymer based bulk-heterojunction organic solar cells / Nur Shakina Mohd Shariff

This study was carried out to investigate and study the performance of P3HT:Graphene nanocomposite thin film for organic photovoltaic application. Organic photovoltaic has been widely researched nowadays but there is still more research needed to be done due to its low efficiency when compared to mo...

Full description

Saved in:

Bibliographic Details
Main Author:	Mohd Shariff, Nur Shakina
Format:	Thesis
Language:	English
Published:	2018
Subjects:	Solar batteries Solar cells
Online Access:	https://ir.uitm.edu.my/id/eprint/79225/1/79225.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-uitm-ir.79225
record_format	uketd_dc
spelling	my-uitm-ir.792252023-09-08T03:56:03Z Hybrid P3HT : graphene nanocomposite as an active layer in polymer based bulk-heterojunction organic solar cells / Nur Shakina Mohd Shariff 2018 Mohd Shariff, Nur Shakina Solar batteries. Solar cells This study was carried out to investigate and study the performance of P3HT:Graphene nanocomposite thin film for organic photovoltaic application. Organic photovoltaic has been widely researched nowadays but there is still more research needed to be done due to its low efficiency when compared to monocrystalline solar cells. Low efficiency is mainly caused by low electron mobility. Therefore, the objective of this research is to improve the electron mobility as well fabricating and characterize the thin film performance. Considering all of the novel characteristics, Poly(3-hexylthiophene-2,5-diyl) (P3HT) and Graphene have been chosen as the active material for the bulk-heterojunction film. Scope of this research is to improve the photocurrent by increasing the electron mobility. Due to many reports from previous research on organic photovoltaic, the thickness of the thin film will be fixed below 100 nm. Low cost and easy fabrication method such as spin coating was chosen to fabricate the thin films. Deposition conditions such as P3HT concentration, Graphene concentration, annealing temperature, annealing time and drying temperature were investigated to determine the best optimized condition for producing a high efficiency P3HT:Graphene solar cells. To determine the optimum parameter, characterization such as optical properties, electrical properties and surface morphology is measured. Optical properties such as absorbance, transmittance and photoluminescence was measured and analyzed. For electrical properties, current voltage (I-V) is measured using solar simulator while surface morphology were characterized using equipment such as FESEM, Surface Profiler, AFM and XRD. It was found that the electron mobility of P3HT: Graphene nanocomposite is higher than P3HT alone. P3HT: Graphene nanocomposite also possess highest photocurrent when P3HT concentration is at 6 mg/mL, Graphene concentration at 2 wt %, dried at temperature of 65°C, anneal for 5 minutes at a temperature of 200°C. These parameter were used to produce the organic solar cell with the configuration of ITO/PEDOT:PSS/P3HT/Au and ITO/PEDOT:PSS/P3HT:Graphene/Au. PEDOT:PSS is used as a hole transport layer in this device. In the device characterization, the electrical properties such as open circuit voltage {Voc), short circuit current (Jsc), fill factor (FF) and efficiency (rj) of the organic solar cell is measured. The efficiency for ITO/PEDOT:PSS/P3HT:Graphene/Au organic solar cells is higher when compared to ITO/PEDOT:PSS/P3HT/Au solar cells. This is expected due to an increase in electron mobility in P3HT: Graphene layer. The effect of light intensity was also characterized ranging from AM 1.0 G until AM 1.75 G. It can be concluded that the efficiency increase as the light intensity increase. This is because as the light intensity increases, the number of photon also increases, which breaks the exitons more in the solar cell. As more exitons break, more electron will flow freely inside the circuit, resulting in a higher current. 2018 Thesis https://ir.uitm.edu.my/id/eprint/79225/ https://ir.uitm.edu.my/id/eprint/79225/1/79225.pdf text en public masters Universiti Teknologi MARA (UiTM) Faculty of Electrical Engineering Mohamad Saad, Puteri Sarah
institution	Universiti Teknologi MARA
collection	UiTM Institutional Repository
language	English
advisor	Mohamad Saad, Puteri Sarah
topic	Solar batteries Solar cells
spellingShingle	Solar batteries Solar cells Mohd Shariff, Nur Shakina Hybrid P3HT : graphene nanocomposite as an active layer in polymer based bulk-heterojunction organic solar cells / Nur Shakina Mohd Shariff
description	This study was carried out to investigate and study the performance of P3HT:Graphene nanocomposite thin film for organic photovoltaic application. Organic photovoltaic has been widely researched nowadays but there is still more research needed to be done due to its low efficiency when compared to monocrystalline solar cells. Low efficiency is mainly caused by low electron mobility. Therefore, the objective of this research is to improve the electron mobility as well fabricating and characterize the thin film performance. Considering all of the novel characteristics, Poly(3-hexylthiophene-2,5-diyl) (P3HT) and Graphene have been chosen as the active material for the bulk-heterojunction film. Scope of this research is to improve the photocurrent by increasing the electron mobility. Due to many reports from previous research on organic photovoltaic, the thickness of the thin film will be fixed below 100 nm. Low cost and easy fabrication method such as spin coating was chosen to fabricate the thin films. Deposition conditions such as P3HT concentration, Graphene concentration, annealing temperature, annealing time and drying temperature were investigated to determine the best optimized condition for producing a high efficiency P3HT:Graphene solar cells. To determine the optimum parameter, characterization such as optical properties, electrical properties and surface morphology is measured. Optical properties such as absorbance, transmittance and photoluminescence was measured and analyzed. For electrical properties, current voltage (I-V) is measured using solar simulator while surface morphology were characterized using equipment such as FESEM, Surface Profiler, AFM and XRD. It was found that the electron mobility of P3HT: Graphene nanocomposite is higher than P3HT alone. P3HT: Graphene nanocomposite also possess highest photocurrent when P3HT concentration is at 6 mg/mL, Graphene concentration at 2 wt %, dried at temperature of 65°C, anneal for 5 minutes at a temperature of 200°C. These parameter were used to produce the organic solar cell with the configuration of ITO/PEDOT:PSS/P3HT/Au and ITO/PEDOT:PSS/P3HT:Graphene/Au. PEDOT:PSS is used as a hole transport layer in this device. In the device characterization, the electrical properties such as open circuit voltage {Voc), short circuit current (Jsc), fill factor (FF) and efficiency (rj) of the organic solar cell is measured. The efficiency for ITO/PEDOT:PSS/P3HT:Graphene/Au organic solar cells is higher when compared to ITO/PEDOT:PSS/P3HT/Au solar cells. This is expected due to an increase in electron mobility in P3HT: Graphene layer. The effect of light intensity was also characterized ranging from AM 1.0 G until AM 1.75 G. It can be concluded that the efficiency increase as the light intensity increase. This is because as the light intensity increases, the number of photon also increases, which breaks the exitons more in the solar cell. As more exitons break, more electron will flow freely inside the circuit, resulting in a higher current.
format	Thesis
qualification_level	Master's degree
author	Mohd Shariff, Nur Shakina
author_facet	Mohd Shariff, Nur Shakina
author_sort	Mohd Shariff, Nur Shakina
title	Hybrid P3HT : graphene nanocomposite as an active layer in polymer based bulk-heterojunction organic solar cells / Nur Shakina Mohd Shariff
title_short	Hybrid P3HT : graphene nanocomposite as an active layer in polymer based bulk-heterojunction organic solar cells / Nur Shakina Mohd Shariff
title_full	Hybrid P3HT : graphene nanocomposite as an active layer in polymer based bulk-heterojunction organic solar cells / Nur Shakina Mohd Shariff
title_fullStr	Hybrid P3HT : graphene nanocomposite as an active layer in polymer based bulk-heterojunction organic solar cells / Nur Shakina Mohd Shariff
title_full_unstemmed	Hybrid P3HT : graphene nanocomposite as an active layer in polymer based bulk-heterojunction organic solar cells / Nur Shakina Mohd Shariff
title_sort	hybrid p3ht : graphene nanocomposite as an active layer in polymer based bulk-heterojunction organic solar cells / nur shakina mohd shariff
granting_institution	Universiti Teknologi MARA (UiTM)
granting_department	Faculty of Electrical Engineering
publishDate	2018
url	https://ir.uitm.edu.my/id/eprint/79225/1/79225.pdf
_version_	1783736267736875008

Hybrid P3HT : graphene nanocomposite as an active layer in polymer based bulk-heterojunction organic solar cells / Nur Shakina Mohd Shariff

Similar Items