Development of eddy current testing instrument on metal testing for non-destructive testing applications

Development of eddy current testing instrument on metal testing for non-destructive testing applications

Eddy current facilities are rapidly developing in the field of industry and the effectiveness of the eddy current testing (ECT) instrument is well established on market and yet, the instruments were very expensive and hard to get in this country. Moreover, the optimization for the specification of m...

Saved in:

書目詳細資料
主要作者:	Elva Alias
格式:	Thesis
語言:	English English
出版:	2019
主題:	TA401-492 Materials of engineering and construction Mechanics of materials
在線閱讀:	https://eprints.ums.edu.my/id/eprint/41649/1/ABSTRACT.pdf https://eprints.ums.edu.my/id/eprint/41649/2/FULLTEXT.pdf
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Evaluation of lift-off effect on surface defect metal with non non-conductive coating by using eddy current testing technique
由: Syafiqa Putri Adlina Harun
出版: (2023)

Optimum distance of lift-off height to detect defect on testing materials using eddy current testing technique
由: Salmia Santa
出版: (2020)

Development of eddy current testing instrument on metal testing for non-destructive testing applications
由: Elva Alias
出版: (2019)

Natural frequencies evaluation on existing reinforced concrete bridges using microtremor testing
由: Idris, Nurul Shazwin
出版: (2019)

Characterization of cyclic plasticity type wear mechanism for titanium alloy, TI-6AL-4V on reciprocating sliding wear test
由: Mohd Harun, Dalila
出版: (2020)

Sputter deposition and characterization of metal sandwiched indium tin oxide/silicon for solar cell application
由: Kabiru Isiyaku, Aliyu
出版: (2020)

Fracture toughness investigation of metallic materials using experiment and finite element analysis
由: Mohd Kamal Mohd Shah
出版: (2012)

Porosity study and effects on mechanical properties of discontinuous reinforced metal matrix composite (DRMMC)
由: Syed Ahmad, Syarifah Nur Aqida
出版: (2004)

Development of conductive sheet composite based on kenaf fibre loaded with polyaniline for anti-static packaging application.
由: Austad, Azhan
出版: (2021)

High temperature fracture toughness and fatigue behavior of ti-zr-mo and w-re alloys for x-ray tube application
由: Harimon, Mohd Azhar
出版: (2017)

Performance of recycled polymeric fiber as reinforcement in bituminous mixture for road maintenance works
由: Usman, Nura
出版: (2019)

Strength prediction and durability performance of concrete containing coal bottom ash as supplementary cementitious material under aggressive environment
由: Ali, Sajjad
出版: (2019)

Strength and water permeability of concrete containing coal bottom ash as cement and fine aggregate replacement material
由: Basirun, Nurul Fasihah
出版: (2019)

Sifat fizikal dan keupayaan mekanikal konkrit campuran abu kulit kupang (perna viridis) sebagai bahan tambah
由: Ismail, Nurul Nabilah
出版: (2019)

Utilization of coal bottom ash and fine coconut shell as partial sand replacement in concrete
由: Mazenan, Puteri Natasya
出版: (2019)

Properties and performance of high strength fibre reinforced concrete by using steel and polypropylene fibres
由: Wan Jusoh, Wan Amizah
出版: (2019)

Effects of kenaf/polyester blending ratios on physical and mechanical properties of yarns produced from ring spinning system
由: Mohd Rusli, Najwa Wajihah
出版: (2019)

The potentials of pennisetum purpureum ash as cement replacement material
由: Nik Pa, Nik Nadia Amira
出版: (2019)

Fatigue life and mechanical behaviour of aluminium alloy aa6061 chips prepared by hot extrusion process
由: Rady, Mohammed Hussien
出版: (2019)

Polylactic acid/thermoplastic tapioca starch blend incorporated with selected essential oils for active food packaging
由: Ajiya, Adamu Dahiru
出版: (2019)

Synthesis and characterization of polyaniline/magnetite nanocomposites for fabrication of nanofiber textile
由: Ibrahim Takai, Zakiyyu
出版: (2019)

Parameter analysis of copper-nickel-tungsten prepared via powder metallurgy process for electrical discharge machining of polycrystalline diamond
由: Sabri, Ainaa Mardhiah
出版: (2019)

Bond strength of corroded high yield steel bars embedded in normal strength concrete
由: Thomas Tan
出版: (2019)

Konkrit Bergentian
由: PPPBP, Pusat Pengajian Perumahan Bangunan Dan Perancangan
出版: (1995)

Bond behaviour of deformed steel rebars in steel fibre high- strength self-compacting concrete
由: Nelly Majain
出版: (2022)

Development and characterisation of a Hybrid Soldering Alloy with AL2O3 Nanopracticles
由: Abdelmagid Abdalla, Hana Ahmed Elbashir
出版: (2022)

Bimodal Porous Ceramic Membrane Via Nanosized Polystryene Templating : Synthesis, Characterization And Performance Evaluation [TA455.C43 L576 2008 f rb].
由: Leo, Choe Peng
出版: (2008)

Biochemical Characterization Of The Interaction Between CTCF/YB-1 Transcription Factors With HPV 16 And 18 E7 Oncoprotein And Their Involvement During C-MYC Gene Regulation In Cell Proliferation Pathway [QR406. V471 2008 f rb].
由: Balakrishnan, Venugopal
出版: (2008)

Theoretical Studies Of Dielectric Susceptibility In Ferroelectric Thin Film [TA418.9.T45 S563 2008 f rb].
由: Sia, Chen How
出版: (2007)

Performance Evaluation Of Steel Slag As Natural Aggregates Replacement In Asphaltic Concrete [TA445.5. T314 2008 f rb].
由: Teoh, Cherh Yi
出版: (2008)

Synthesis and characterization of nanoparticles of Nico Alloy @Au Core-Shell Structure
由: Nguyen, Ngoc Minh
出版: (2007)

A Study On The Physical And Mechanical Properties Of Asphaltic Concrete Incorporating Crumb Rubber Produced Through Dry Process [TA443.A7 A136 2007 f rb].
由: MOHAMED, ABDULLAHI ALI
出版: (2007)

Studies Of Convective Drying Using Numerical Analysis On Local Hardwood [TA419.A2 L478 2007 f rb].
由: Lee, Kok Onn
出版: (2007)

Nanostructured Materials As Catalysts For The Production Of Gasoline From Used Palm Oil And Crude Palm Oil : Synthesis, Characterization And Activity Studies [TA418.9.N35 A299 2007 f rb].
由: Ahmad Shah, Noor Aisyah
出版: (2007)

Synthesis And Characterization Of Barium Titanium Oxide (Batio3) And Calcium Copper Titanium Oxide (Cacu3ti4o12) Pellets And Thin Films [TA455.C43 Y46 2008 f rb].
由: Yeoh, Cheow Keat
出版: (2008)

Penghasilan Agregat Ringan Dari Abu Bahan Api Terhancur Sebagai Bahan Utama [TA441. K45 2006 f rb].
由: Ismail, Khairu Nizar
出版: (2006)

Study Of Adhesion Properties Of Natural Rubber, Epoxidized Natural Rubber, And Ethylene-Propylene Diene Terpolymer-Based Adhesives [TA455.R8 K98 2007 f rb].
由: Kwo, Han Kiu
出版: (2007)

Synthesis And Characterization Of Low Bandgap Nanocrystalline T-Zirconia [TA418.9.N35 N692 2007 f rb].
由: Prastomo, Niki
出版: (2007)

Analyses On The Stability Of Irrigation Channel Embankment With Geosynthethic Reinforcement [TA455.G44 S525 2008 f rb].
由: Shahri, Ali Tolooiyan
出版: (2008)

The Influence Of Equal Channel Angular Pressing Angles On The Microstructure And Properties Of Al-Si-Mg Alloy [TA483. J91 2006 f rb].
由: Altayef Al-Jubouri, Ali Abadi
出版: (2006)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group