Study of plasma cutting efficiency with different operating parameters
Plasma, a fourth state of matter distinct from solid or liquid or gas and present in stars and fusion reactors; a gas becomes plasma when it is heated until atoms lose all their electrons, leaving a highly electrified collection of nuclei and free electrons. The usage of advanced machining, such...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English |
| 主题: | |
| 在线阅读: | http://dspace.unimap.edu.my:80/xmlui/bitstream/123456789/12847/1/p.%201-24.pdf http://dspace.unimap.edu.my:80/xmlui/bitstream/123456789/12847/2/Full%20Text.pdf |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | Plasma, a fourth state of matter distinct from solid or liquid or gas and present in
stars and fusion reactors; a gas becomes plasma when it is heated until atoms lose all their
electrons, leaving a highly electrified collection of nuclei and free electrons. The usage of
advanced machining, such as Plasma Arc Cutting machine to cut Mild Steel, Copper Alloy
and Aluminium was very limited in the industry. Selco Genesis 90 Plasma Arc Cutting
machine was used to cut Copper Alloy, Aluminium and Mild Steel in this study. The usage
of Taguchi approach Design of Experiments from the designing steps until the analyzing
phase from the experiment was used. In this study, Design of Experiment L-9 (34) layout
is used. In this study, the parameters determined were the air pressure [bar], current flow
rate [A], cutting speed [mm/min] and arc gap [mm]. These parameters used to analyze the
setting required for optimizing the process variables for Plasma Arc Cutting machine to
gain the best combination. The effect of these factors was the calculation of Material
Removal Rate (MRR) and Surface Roughness (Ra). Confirmation test must be done to
confirm the value estimated through the software. The confirmation run was done by using
the setting gain from the software. The estimated optimum value and the actual value
obtained from the confirmation test that is allowed are in range 10%. |
|---|