NMPC-PID based new control structure design for altitude and attitude stabilization of non-linear quad-rotor type unmanned aerial vehicles (UAV)
Quad-rotor typed unmanned aerial vehicles (UAV) are rotorcraft that has four propellers. In this design there are two arms and each arm has two propellers at their end.. It has complex controlling structure, that is why this rotorcraft is overall non-linear in nature. Hence, it creates a lot of dif...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English |
| 主题: | |
| 在线阅读: | http://dspace.unimap.edu.my:80/xmlui/bitstream/123456789/44117/1/p.1-24.pdf http://dspace.unimap.edu.my:80/xmlui/bitstream/123456789/44117/2/full%20text.pdf |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | Quad-rotor typed unmanned aerial vehicles (UAV) are rotorcraft that has four propellers. In this design there are two arms and each arm has two propellers at their end.. It has complex controlling structure, that is why this rotorcraft is overall non-linear in nature. Hence, it
creates a lot of difficulties during flying and become very difficult to make it fly stabilize under different sort of uncertainties. Therefore, stabilization of non-linear UAV system under various uncertainties like wind burst, system and sensor noise conditions has been a
challenging research domain among the researchers and many of research work has been
done in this domain, but still there is a lot of room available in this area. The objective of
this research is to develop a stable control algorithm for Quad-rotor attitude and altitude
stabilization. To solve its stability problem, the important role is done by making a control
algorithm which satisfies its control system requirements. In this thesis, the Newton-Euler
formalism was used to model the dynamic of Quad-rotor system and then a robust with
more accurate control for stabilization of non-linear UAV system is intended. The proposed
control technique is divided into two sub-systems. In order to validate the disturbance
rejection operation, a robust Proportional, Integral and Derivative (PID) controller is
derived in first phase of proposed system. Then for the removal of unwanted sensor and
system noises, Non-Linear Model Predictive Control (NMPC) control algorithm is used
which works on the technique of minimizing the cost criterion function. It is shown that
proposed NMPC-PID based control technique results in a more robust stable control system
and to verify the effectiveness of proposed technique on UAV system, it is simulated on
MATLAB-Simulink environment which confirms and verify improvements in quality and
effectiveness of the proposed method. |
|---|