Implementation of adaptive pole assignment PID controller on Dc-Dc converters for renewable energy sources
This thesis presents the implementation of adaptive pole assignment PID controller on DC-DC converters for renewable energy sources. This study involves the modeling and development of proposed converters; buck and boost converter that controlled by an adaptive pole assignment PID controller. Thi...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Subjects: | |
| Online Access: | http://dspace.unimap.edu.my:80/xmlui/bitstream/123456789/44299/1/P.1-24.pdf http://dspace.unimap.edu.my:80/xmlui/bitstream/123456789/44299/2/Full%20Text.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This thesis presents the implementation of adaptive pole assignment PID controller on
DC-DC converters for renewable energy sources. This study involves the modeling and
development of proposed converters; buck and boost converter that controlled by an
adaptive pole assignment PID controller. This study also involves the data collection of
solar irradiance, temperature, and wind speed . Both converters are used to convert
unregulated DC input to a controlled DC output to a desired voltage level. The system
of 24V/12V is applied to a buck converter while 12V/24V is compatible to boost
converter. In DC-DC converters, the output voltage on itself is usually unstable. The
necessity of a control system for the converter is to maintain a constant output voltage
regardless of variations in DC source voltage and the load current in closed-loop
system. In regulating the output from a solar panel and wind turbine which is in direct
current (DC) form, a constant output voltage is needed to supply to
electronics/electronic appliances. Thus, a sophisticated conversion technique for DCDC
form is required which is known as a converter. Besides, the requirement of a
control system for a stable system should be with faster settling time and less overshoot
voltage. However, the output voltage of the converters on itself is usually unstable and
oscillates especially at the beginning of the transient response. The existing of the
damping elements; resistor and inductor in the circuit of the converters contribute to the
high percentage of overshoot voltage and output voltage ripple. Practically, the high
overshoot voltage may lead to spark current which it could harm to consumers.
Therefore a converter with a controller is needed to overcome the problem. The data
collection of solar irradiance, temperature, and wind speed were analysed to know the
potential of solar and wind energy application in Perlis. These data were measured
using weather station that already installed at the Centre of Excellent for Renewable
Energy (CERE), located in Kangar, Perlis. Based on the average monthly solar
irradiance for the year 2011, the average reading of solar irradiance is 1229W/m2 while
the highest speed of wind is recorded at 26.56m/s. This show that both energies have a
potential PV and wind power generation in Perlis. Meanwhile, the performance of DCDC
converters and the proposed controller have been evaluated in terms of percentage
of overshoot in the output voltage as well as inductance current using Matlab/Simulink
software by analysing the effect of damping element; load resistor. Then, the results
obtained will be evaluated with experimental results. These converters are then have
been implemented into real-time with application of PIC microcontroller. Based on the
simulation results, the performance of converters that simulated with the calculated
value of the load resistor; 40Ω, show a better result compared to trial and error value,
84Ω whenever simulated with the proposed controller. Besides, the experimental results
show that the proposed controller is capable in minimizing the occurrence of overshoot
in output voltage and inductance current besides provide a better performance by
reducing the oscillation in steady state and faster settling time. Overall, the simulation
results and experimental results are evaluated and prove a satisfactory of the proposed
controller to adapt with DC-DC converters as well as in these energy system. |
|---|