Cfd Simulation To Study The Effects Of Ribs In A Converging Nozzle Flow At Sonic Mach Number
The presence of a blunt base leads to flow separation in aerodynamic bodies, which causes a low-pressure in the wake region. At sonic Mach number, low pressure in the wake region contributes up to sixty percent of the total drag. This study is conducted to study the effect of the rectangular ribs...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2020
|
| Subjects: | |
| Online Access: | http://eprints.usm.my/47771/1/Cfd%20Simulation%20To%20Study%20The%20Effects%20Of%20Ribs%20In%20A%20Converging%20Nozzle%20Flow%20At%20Sonic%20Mach%20Number.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The presence of a blunt base leads to flow separation in aerodynamic bodies,
which causes a low-pressure in the wake region. At sonic Mach number, low pressure
in the wake region contributes up to sixty percent of the total drag. This study is
conducted to study the effect of the rectangular ribs on the base pressure. The
parameters considered are the nozzle pressure ratio, rib’s aspect ratio, Length to
Diameter (L/D) ratio of the duct when placed circumferentially operating from
subsonic to sonic Mach number. The simulation is performed using CFD, and the k-ɛ
turbulence model is employed. Initially, the simulation results obtained are validated
with experimental work for different L/D ratio of the duct at various Nozzle Pressure
Ratio’s (NPR), and the aspect ratio of the ribs from 3:1 to 3:3 for area ratio of 6.25.
The results are in good agreement with the experimental results. Later simulations are
done for a single rib, which is placed at different locations and aspect ratios for NPRs
in the range from 1.5 to 5 from the base. Base pressure variations, velocity, and
pressure field changes for the above variables are discussed. The simulation results
indicate that the rib breaks the primary vortex at the base and form multiple vortices
and hence controls the base pressure in the wake region. The results show that a
rectangular rib with a lower aspect ratio is effective in reducing the base pressure,
whereas the rib with a higher aspect ratio tends to increase the base pressure. The
simulations are also conducted for a duct with a diameter, D = 20 mm. In this case, the
rectangular rib with aspect ratios 3:1, 3:2, and 3:3 is placed at 20 mm, 40 mm, 60 mm,
and 80 mm locations, for the same NPRs. Results show that the height and position of
the rib plays a vital role in controlling the base pressure. |
|---|