Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing)

Nowadays, materials that have been extensively used in the automotive industry are low carbon steel, high strength steel, aluminium, plastics and composites. However, plastic materials are not commonly used as a vehicle body part because their properties are much lower than steel in term of tensile...

Full description

Saved in:

Bibliographic Details
Main Author:	Shafiq Aripin, Muhammad Wazir
Format:	Thesis
Language:	English English
Published:	2019
Subjects:	T Technology (General) TS Manufactures
Online Access:	http://eprints.utem.edu.my/id/eprint/25158/1/Effect%20Of%20Electroless%20Plating%20Layer%20Thickness%20On%20Mechanical%20Properties%20Of%20Rapid%20Prototyping%20%283D%20Printing%29.pdf http://eprints.utem.edu.my/id/eprint/25158/2/Effect%20Of%20Electroless%20Plating%20Layer%20Thickness%20On%20Mechanical%20Properties%20Of%20Rapid%20Prototyping%20%283D%20Printing%29.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-utem-ep.25158
record_format	uketd_dc
institution	Universiti Teknikal Malaysia Melaka
collection	UTeM Repository
language	English English
advisor	Salleh, Mohd Shukor
topic	T Technology (General) TS Manufactures
spellingShingle	T Technology (General) TS Manufactures Shafiq Aripin, Muhammad Wazir Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing)
description	Nowadays, materials that have been extensively used in the automotive industry are low carbon steel, high strength steel, aluminium, plastics and composites. However, plastic materials are not commonly used as a vehicle body part because their properties are much lower than steel in term of tensile strength and impact strength but on the other hand, plastics are very light compared to steel. Several types of plastic that commonly used in the automotive industry are such as acrylonitrile butadiene styrene (ABS) and polypropylene (PP). In order to improve the surface finish of ABS, a thin coating on the top of the surface is needed. Therefore, this study was carried out in order to analyze the effect of different rapid prototyping path on tensile strength, impact strength and surface roughness properties as well as to investigate the effect of different coating on ABS. This study was divided into three sections, that are none coating, spray paint coating, and electroless plating. Two parameters that has been used in rapid prototyping were a vertical and horizontal path of position printing. This study also used a quantitative experiment using an analysis of variance (ANOVA). The results show that the significant factor that affect on ABS 3D printing were vertical path of position printing and electroless plating. Vertical path of position printing contributed significantly in increasing tensile strength and impact strength. Whereas, the surface roughness shows a minimum value when using electroless plating as a coating medium. The results of tensile strength, impact strength and surface roughness obtained from this experiment were 17.14 MPa, 0.03937 J/mm2 and 0.7533 μm respectively when these two parameters were applied during the experiment.
format	Thesis
qualification_name	Master of Philosophy (M.Phil.)
qualification_level	Master's degree
author	Shafiq Aripin, Muhammad Wazir
author_facet	Shafiq Aripin, Muhammad Wazir
author_sort	Shafiq Aripin, Muhammad Wazir
title	Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing)
title_short	Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing)
title_full	Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing)
title_fullStr	Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing)
title_full_unstemmed	Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing)
title_sort	effect of electroless plating layer thickness on mechanical properties of rapid prototyping (3d printing)
granting_institution	Universiti Teknikal Malaysia Melaka
granting_department	Faculty of Manufacturing Engineering
publishDate	2019
url	http://eprints.utem.edu.my/id/eprint/25158/1/Effect%20Of%20Electroless%20Plating%20Layer%20Thickness%20On%20Mechanical%20Properties%20Of%20Rapid%20Prototyping%20%283D%20Printing%29.pdf http://eprints.utem.edu.my/id/eprint/25158/2/Effect%20Of%20Electroless%20Plating%20Layer%20Thickness%20On%20Mechanical%20Properties%20Of%20Rapid%20Prototyping%20%283D%20Printing%29.pdf
_version_	1747834108061417472
spelling	my-utem-ep.251582021-09-29T09:54:50Z Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing) 2019 Shafiq Aripin, Muhammad Wazir T Technology (General) TS Manufactures Nowadays, materials that have been extensively used in the automotive industry are low carbon steel, high strength steel, aluminium, plastics and composites. However, plastic materials are not commonly used as a vehicle body part because their properties are much lower than steel in term of tensile strength and impact strength but on the other hand, plastics are very light compared to steel. Several types of plastic that commonly used in the automotive industry are such as acrylonitrile butadiene styrene (ABS) and polypropylene (PP). In order to improve the surface finish of ABS, a thin coating on the top of the surface is needed. Therefore, this study was carried out in order to analyze the effect of different rapid prototyping path on tensile strength, impact strength and surface roughness properties as well as to investigate the effect of different coating on ABS. This study was divided into three sections, that are none coating, spray paint coating, and electroless plating. Two parameters that has been used in rapid prototyping were a vertical and horizontal path of position printing. This study also used a quantitative experiment using an analysis of variance (ANOVA). The results show that the significant factor that affect on ABS 3D printing were vertical path of position printing and electroless plating. Vertical path of position printing contributed significantly in increasing tensile strength and impact strength. Whereas, the surface roughness shows a minimum value when using electroless plating as a coating medium. The results of tensile strength, impact strength and surface roughness obtained from this experiment were 17.14 MPa, 0.03937 J/mm2 and 0.7533 μm respectively when these two parameters were applied during the experiment. 2019 Thesis http://eprints.utem.edu.my/id/eprint/25158/ http://eprints.utem.edu.my/id/eprint/25158/1/Effect%20Of%20Electroless%20Plating%20Layer%20Thickness%20On%20Mechanical%20Properties%20Of%20Rapid%20Prototyping%20%283D%20Printing%29.pdf text en public http://eprints.utem.edu.my/id/eprint/25158/2/Effect%20Of%20Electroless%20Plating%20Layer%20Thickness%20On%20Mechanical%20Properties%20Of%20Rapid%20Prototyping%20%283D%20Printing%29.pdf text en validuser https://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=117861 mphil masters Universiti Teknikal Malaysia Melaka Faculty of Manufacturing Engineering Salleh, Mohd Shukor 1. 3D Systems Inc. (2017) ‘Stereolithography Printers (SLA)’. Available at: https://www.3dsystems.com/3d-printers/plastic#stereolithography-printers-sla. 2. ACC (2014) ‘Plastics and polymer composites technology roadmap for automotive markets’, American Chemistry Council (ACC), (March), pp. 1–58. doi: 10.1007/s10853-015-9279-3. 3. Ahn, D. et al. (2009) ‘Representation of surface roughness in fused deposition modelling’, Journal of Materials Processing Technology, 209(15–16), pp. 5593–5600. doi: 10.1016/j.jmatprotec.2009.05.016. 4. Anderson, H. and Atkins, J. (2008) ‘Injection Molding : The Art of Making Plastic Parts’. 5. ASTM International (2014) ‘Standard Practice for Preparation of Plastics Materials for Electroplating’, 79(Reapproved), pp. 1–2. doi: 10.1520/B0558-79R138.etching. 6. Callister, W. D. and Rethwisch, D. G. (2008) Fundamentals of Materials Science and Engineering. New York: John Wiley & Sons, Inc. 7. Claire Clarke (2016) Injection Moulding. Available at: http://www.martins-rubber.co.uk/blog/advantages-and-disadvantages-of-injection-moulding/ (Accessed: 10 May 2018). 8. Demitrios Roumonis (2012) ‘METHOD OF SILVER PLATING AND ARTICLES AND/OR OBJECTS FORMED BY THE METHOD OF SILVER PLATING’. 9. EAK (2015) The Difference Between Polyurethane & ABS Plastic Car Body Kits - Express Aero Kits. Available at: http://expressaerokits.com/blog/the-difference-between-polyurethane-abs-plastic-car-body-kits/ (Accessed: 5 May 2018). 10. Equbal, A. and Sood, A. K. (2014) ‘Advanced Materials Manufacturing & Characterization Electroless plating of copper on different shaped ABS parts : A comparison’, 4(1), pp. 32–41. 11. Formlabs (2017) ‘The Ultimate Guide to Stereolithography (SLA) 3D Printing’, Tutorials, (March). Available at: https://formlabs.com/blog/ultimate-guide-to-stereolithography-sla-3d-printing/. Formosa Plastics (2006) ‘Formolene Polypropylene Single Screw PP Sheet Extrusion’, Coating. 12. Hart, A. (1996) ‘Electroplating of Plastics’, Materials World, 4(1), pp. 265–267. doi: 10.4271/650036. 13. Hull, C. (2012) ‘On Stereolithography’, Virtual and Physical Prototyping, 7(3), p. 177. doi: 10.1080/17452759.2012.723409. 14. IITB (2011) ‘Module 3 Selection of Manufacturing Processes’, in. 15. Instron Corporation (2005) ‘Reference Manual - Equipment: Instron Series 5500 Load Frames Including Series 5540, 5560, 5580’. 16. Instron Corporation (2013) ‘CEAST 9000 Series Manual’, p. 9. Available at: http://www.instron.us/~/media/literature-library/products/2013/09/ceast-9000-series-pendulum-impact-testers.pdf?la=en. 17. Kair, A. B. and Sofos, K. (2014) ‘Additive Manufacturing and Production of Metallic Parts in Automotive Industry A Case Study on Technical , Economic and Environmental Sustainability Aspects In collaboration with’, pp. 1–123. 18. Klein, R. (2011) ‘Laser Welding of Plastics: Materials, Processes and Industrial Applications’, Laser Welding of Plastics: Materials, Processes and Industrial Applications, pp. 1–69. doi: 10.1002/9783527636969. 19. Levchenko, A. (2015) ‘Additive manufacturing as a mean of rapid prototyping : from words to the actual model’. 20. Lipson, H. et al. (2005) ‘3-D Printing the History of Mechanisms’, Journal of Mechanical Design, 127(5), p. 1029. doi: 10.1115/1.1902999. 21. Lorecentral (2018) Polypropylene vs ABS. Available at: https://www.lorecentral.org/2018/02/polypropylene-vs-abs.html (Accessed: 5 May 2018). 22. Lyu, M. Y. and Choi, T. G. (2015) ‘Research trends in polymer materials for use in lightweight vehicles’, International Journal of Precision Engineering and Manufacturing, 16(1), pp. 213–220. doi: 10.1007/s12541-015-0029-x. 23. Maria, C. (2015a) ‘Laser Sintering’, Laser Sintering, pp. 1–10. 24. Maria, C. (2015b) ‘Stereolithography’, Stereolithography, p. 5. Available at: http://www.centropiaggio.unipi.it/sites/default/files/course/material/2015-12-02_-_stereolithography.pdf. 25. Marshall, B. (2000) How Stereolithography (3-D Layering) Works \| HowStuffWorks. Available at: https://computer.howstuffworks.com/stereolith.htm (Accessed: 20 May 2018). 26. Mazumdar, S. (2013) ‘Opportunity and Challenges in Automotive Composites Industry’. 27. Olivera, S. et al. (2016) ‘Plating on acrylonitrile–butadiene–styrene (ABS) plastic: a review’, Journal of Materials Science. Springer US, 51(8), pp. 3657–3674. doi: 10.1007/s10853-015-9668-7. 28. Pandey, P. M. (2010) ‘Rapid prototyping technologies, applications and part deposition planning’, Retrieved October, (June), p. 15. Available at: http://web.iitd.ac.in/~pmpandey/MEL120_html/RP_document.pdf. 29. Ramkumar, J. (2015) ‘Additive Manufacturing’. doi: 10.1201/b19360. 30. Revo Technologies (2010) ‘Manufacturing of Plastic Components Thermoset or Thermosetting Plastics’, in, pp. 1–22. 31. Roland Berger (2013) ‘Additive Manufacturing: A game changer for the manufacturing industry?’, Roland Berger Strategy Consultants, (November), p. 33. Available at: http://www.rolandberger.com/media/pdf/Roland_Berger_Additive_Manufacturing_20131129.pdf. 32. Sreehitha, V. (2017) ‘Impact of 3D Printing in Automotive Industries’, International Journal of Mechanical And Production Engineering, (52), pp. 2320–2092. Available at: http://iraj.in. 33. Stratasys (2018a) Finishing 3D Printed Parts \| Stratasys. Available at: http://www.stratasys.com/solutions/finishing-processes (Accessed: 20 May 2018). 34. Stratasys (2018b) ‘Five Ways 3D Printing Is Transforming the Automotive Industry Five Ways 3D Printing Is Transforming the Automotive Industry’. 35. Uddandapu, P. K. (2013) ‘Impact Analysis on Car Bumper by varying speeds using Materials \nABS Plastic and Poly Ether Imide by Finite Element Analysis \nsoftware Solid works’, Ijmer, 3(1), pp. 391–395. Available at: http://www.ijmer.com/papers/Vol3_Issue1/CO31391395.pdf. 36. Zolkifly, N. (2013) ‘Examining customer’s satisfaction towards national car attributes among Malay, Chinese and Indian’, Elixir International Journal, 56A, pp. 13539–13542. Available at: http://www.elixirpublishers.com/articles/1363594065_56A (2013) 13539-13542.pdf.

Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing)

Similar Items