Processibility of black garbage bag as a novel binder system in metal injection molding
The issues to be highlighted here is to fundamentally evaluate the potential of using waste Garbage Bag from High Density Polyethylene (HDPE) as a backbone binder in Metal Injection Molding (MIM.) This is by the fact that the earth has tons of Garbage Bag disposed every day and researcher believ...
Saved in:
Main Author: | |
---|---|
Format: | Thesis |
Language: | English English English |
Published: |
2012
|
Subjects: | |
Online Access: | http://eprints.uthm.edu.my/1995/1/24p%20NAJWA%20MUSTAFA.pdf http://eprints.uthm.edu.my/1995/2/NAJWA%20MUSTAFA%20COPYRIGHT%20DECLARATION.pdf http://eprints.uthm.edu.my/1995/3/NAJWA%20MUSTAFA%20WATERMARK.pdf |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | The issues to be highlighted here is to fundamentally evaluate the potential of using
waste Garbage Bag from High Density Polyethylene (HDPE) as a backbone binder in
Metal Injection Molding (MIM.) This is by the fact that the earth has tons of Garbage
Bag disposed every day and researcher believes such waste can be converted into more
beneficial industrial product. Thus this research investigates the potential uses of
garbage bag as a novel binder system in metal injection molding. Stainless steel SS316L
was used which is garbage bag (HDPE) and palm kernel acts as binder system.
Feedstock with three composition 30%, 40% and 55% powder loading (PL) were
injected by injection molding machine with several injection parameter were optimized
such as injection temperature (A), barrel temperature (B), injection pressure (C) and
Speed (D). The optimum parameter for highest green density, strength were optimized in
Taguchi Method orthogonal Array L9 ( 3
) and analysed by using Signal to Noise Ratio
(S/N ratio).Results shows the optimum variables for 30% PL the highest density is A0,
B2, C1 and D0 while for green strength are combination of A0, B0, C0, D1. For powder
loading 40%, the optimize parameter for highest green part density are A2, B2, C0 and D2
and A0, B0, C1, and D0 for green strength. Besides, the highest green density for 0.55
PL by following the optimum variable are A2 , B2, C0 and D2 while for highest green
strength are A2, B2, C2, and D2. Garbage bag are suitable acted as a binder system in
metal injection molding. Furthermore, it could reduce the cost of binder system. The
suitable volume ratios in mixing process produce a better feedstock in order to produce
the green part by injection molding. Taguchi Method is among the best method in
optimizing the injection variables as it can reduce the cost, time, improve accuracy and
efficiency |
---|