Fabrication and characterization of fly ash hollow fibre ceramic membrane for low level radioactive waste treatment

Hollow fibre ceramic membrane has excellent properties that could perform in high pressure, harsh chemical and thermal resistance environment. However, ceramic material is quite costly and could become a drawback in the fabrication of ceramic membrane. The abundance and low cost of fly ash are the m...

Full description

Saved in:
Bibliographic Details
Main Author: Zulkifli, Siti Nur Afiqah
Format: Thesis
Language:English
Published: 2020
Subjects:
Online Access:http://eprints.utm.my/id/eprint/92074/1/SitiNurAfiqahMSChE2020.pdf
Tags: Add Tag
No Tags, Be the first to tag this record!
id my-utm-ep.92074
record_format uketd_dc
spelling my-utm-ep.920742021-08-30T04:59:26Z Fabrication and characterization of fly ash hollow fibre ceramic membrane for low level radioactive waste treatment 2020 Zulkifli, Siti Nur Afiqah TP Chemical technology Hollow fibre ceramic membrane has excellent properties that could perform in high pressure, harsh chemical and thermal resistance environment. However, ceramic material is quite costly and could become a drawback in the fabrication of ceramic membrane. The abundance and low cost of fly ash are the major factors for the present study to fabricate the fly ash hollow fibre ceramic membrane. Three fly ash loadings which were 40 wt %, 45 wt % and 50 wt % were fabricated as fly ash hollow fibre ceramic membrane (FA-HFCM). All the three different loadings were sintered at three different sintering temperatures which were 1150 ºC, 1250 ºC, and 1350 ºC to be characterised by employing three point bending test and scanning electron microscopy to evaluate their strength and morphology. All the three fly ash loadings had optimum characteristics at 1250 ºC sintering temperature. Surface roughness and pore size distribution for all three fly ash loading at 1250 ºC sintering temperature were characterized using atomic force microscopy and mercury intrusion porosimetry (MIP). The volumetric porosity, shrinkage, and density for all three loadings also were determined to support the result of bending strength. From the results obtained, the 45 wt % FA-HFCM was found to be the optimum fly ash loading due to its considerable strength of 37 MPa, less surface roughness and acceptable pore size distribution which was in the range of 0.22 µm to 10.33 µm, resulting in a better water permeability which was 29.02 L/m2hr. Next, the 45 wt % FA-HFCM was sintered at three different sintering temperatures of 1150 ºC, 1250 ºC, and 1350 ºC for the investigation on crystallinity and pore size distribution by X- ray diffraction and MIP. The results show that higher pore volume for 45 wt % FA-HFCM at sintering temperature 1250ºC could provide higher surface area for the adsorbent to attract adsorbate and help reduce the resistance of water permeation. In addition, there was presence of phase crystallization of Mullite, Anorthite and Pyrophyllite which contributed to the ionic charge of silica and alumina to perform in the adsorption activity. The treatment of low level uranium in water was performed by 45 wt % FA-HFCM that was sintered at 1250 ºC in dual function mode which were adsorption and filtration methods. The result of zeta potential shows that FA-HFCM and uranium were present in negatively charged, but adsorption of uranium onto FA-HFCM in adsorption method shows that adsorption activity occurred between ionic charges of uranium and membrane. Removal of uranium was investigated by batch, and in the effect of pH from 3 – 8, both methods achieved higher removal of uranium at pH 3. Meanwhile, in the effect of contact time, the removal of uranium in filtration method achieved 98% efficiency in 4 hr, and adsorption method achieved 92 % efficiency after 3 hr. The study of kinetic models for adsorption activity was fitted with the pseudo-second order, and the FA-HFCM achieved adsorption capacity with 2.00 mg/g of uranium. This study concluded that characteristics of FA-HFCM as adsorbent membrane, successfully treated the low level uranium employing both adsorption and filtration method. 2020 Thesis http://eprints.utm.my/id/eprint/92074/ http://eprints.utm.my/id/eprint/92074/1/SitiNurAfiqahMSChE2020.pdf application/pdf en public http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:139327 masters Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering Faculty of Engineering - School of Chemical & Energy Engineering
institution Universiti Teknologi Malaysia
collection UTM Institutional Repository
language English
topic TP Chemical technology
spellingShingle TP Chemical technology
Zulkifli, Siti Nur Afiqah
Fabrication and characterization of fly ash hollow fibre ceramic membrane for low level radioactive waste treatment
description Hollow fibre ceramic membrane has excellent properties that could perform in high pressure, harsh chemical and thermal resistance environment. However, ceramic material is quite costly and could become a drawback in the fabrication of ceramic membrane. The abundance and low cost of fly ash are the major factors for the present study to fabricate the fly ash hollow fibre ceramic membrane. Three fly ash loadings which were 40 wt %, 45 wt % and 50 wt % were fabricated as fly ash hollow fibre ceramic membrane (FA-HFCM). All the three different loadings were sintered at three different sintering temperatures which were 1150 ºC, 1250 ºC, and 1350 ºC to be characterised by employing three point bending test and scanning electron microscopy to evaluate their strength and morphology. All the three fly ash loadings had optimum characteristics at 1250 ºC sintering temperature. Surface roughness and pore size distribution for all three fly ash loading at 1250 ºC sintering temperature were characterized using atomic force microscopy and mercury intrusion porosimetry (MIP). The volumetric porosity, shrinkage, and density for all three loadings also were determined to support the result of bending strength. From the results obtained, the 45 wt % FA-HFCM was found to be the optimum fly ash loading due to its considerable strength of 37 MPa, less surface roughness and acceptable pore size distribution which was in the range of 0.22 µm to 10.33 µm, resulting in a better water permeability which was 29.02 L/m2hr. Next, the 45 wt % FA-HFCM was sintered at three different sintering temperatures of 1150 ºC, 1250 ºC, and 1350 ºC for the investigation on crystallinity and pore size distribution by X- ray diffraction and MIP. The results show that higher pore volume for 45 wt % FA-HFCM at sintering temperature 1250ºC could provide higher surface area for the adsorbent to attract adsorbate and help reduce the resistance of water permeation. In addition, there was presence of phase crystallization of Mullite, Anorthite and Pyrophyllite which contributed to the ionic charge of silica and alumina to perform in the adsorption activity. The treatment of low level uranium in water was performed by 45 wt % FA-HFCM that was sintered at 1250 ºC in dual function mode which were adsorption and filtration methods. The result of zeta potential shows that FA-HFCM and uranium were present in negatively charged, but adsorption of uranium onto FA-HFCM in adsorption method shows that adsorption activity occurred between ionic charges of uranium and membrane. Removal of uranium was investigated by batch, and in the effect of pH from 3 – 8, both methods achieved higher removal of uranium at pH 3. Meanwhile, in the effect of contact time, the removal of uranium in filtration method achieved 98% efficiency in 4 hr, and adsorption method achieved 92 % efficiency after 3 hr. The study of kinetic models for adsorption activity was fitted with the pseudo-second order, and the FA-HFCM achieved adsorption capacity with 2.00 mg/g of uranium. This study concluded that characteristics of FA-HFCM as adsorbent membrane, successfully treated the low level uranium employing both adsorption and filtration method.
format Thesis
qualification_level Master's degree
author Zulkifli, Siti Nur Afiqah
author_facet Zulkifli, Siti Nur Afiqah
author_sort Zulkifli, Siti Nur Afiqah
title Fabrication and characterization of fly ash hollow fibre ceramic membrane for low level radioactive waste treatment
title_short Fabrication and characterization of fly ash hollow fibre ceramic membrane for low level radioactive waste treatment
title_full Fabrication and characterization of fly ash hollow fibre ceramic membrane for low level radioactive waste treatment
title_fullStr Fabrication and characterization of fly ash hollow fibre ceramic membrane for low level radioactive waste treatment
title_full_unstemmed Fabrication and characterization of fly ash hollow fibre ceramic membrane for low level radioactive waste treatment
title_sort fabrication and characterization of fly ash hollow fibre ceramic membrane for low level radioactive waste treatment
granting_institution Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering
granting_department Faculty of Engineering - School of Chemical & Energy Engineering
publishDate 2020
url http://eprints.utm.my/id/eprint/92074/1/SitiNurAfiqahMSChE2020.pdf
_version_ 1747818563497885696