Optimization of underbalanced hydraulics for an aerated mud system

Optimization of underbalanced hydraulics for an aerated mud system

Underbalanced drilling (UBD) has gained popularity during recent years, as it provides a procedure to prevent formation damage, minimise lost circulation risks, and improve the rate of penetration. However, one of the most crucial steps in UBD design is to optimise the drilling hydraulics for the hi...

Saved in:

書目詳細資料
主要作者:	Al-Tamimi, Zayed Mohammed Salem
格式:	Thesis
語言:	English
出版:	2014
主題:	TP Chemical technology
在線閱讀:	http://eprints.utm.my/id/eprint/92984/1/ZayedMohammedSalemMSChE2014.pdf
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Wellbore pressure prediction after pipe connection operation in underbalanced drilling
由: Kootiani, Reza Cheraghi
出版: (2015)

Scale-up strategies in stirred and aerated bioreactor
由: Zainal Alam, Muhd. Nazrul Hisham
出版: (2005)

Moisture content influence on composting parameters and degradation kinetic models in an aerated closed system
由: Zailani, Siti Nazrah
出版: (2018)

A review of vegetable oils technical properties as enviromental friendly mud
由: Othman, Mohd. Amerul Asrah
出版: (2017)

Performance evaluation of surfactant enhanced nanomaterial as efficient water based mud additive
由: Nagayan, Buwaneswari
出版: (2019)

Nanosilica-enhanced water-based drilling mud for hole cleaning in inclined wells
由: Boyou, Natalie Vanessa
出版: (2019)

Hydraulic fracturing application in shale gas reservoir
由: Vijayan, Sharniyah
出版: (2017)

Effect of nanoparticles in cuttings transport perrformance of water based muds at eccentric drill pipe
由: Abuhoureyah, Rafeq Ali Hussein
出版: (2023)

Enhancement of water based mud performance using iron oxide and polyanionic cellulose nanoparticles
由: Nihaal, Shaikh
出版: (2021)

Application of polypropylene nanosilica as additives in water based mud to improve rheological properties and shale stability
由: Mat Nasir, Muhamad Hakim
出版: (2019)

Application of slag cement based aerated lightweight concrete in non-load bearing wall panels
由: Narayanan, Arresh Vhina
出版: (2002)

Development of an ultra-lightweight coconut shell-based proppant for hydraulic fracturing of subterranean formations
由: Gharibi, Abdoullatif
出版: (2016)

Transient hydraulics and multiphase kick tolerance study to improve design of narrow margin well
由: Goo, Jia Jun
出版: (2018)

Drying of paddy in a commercial scale Laterally Aerated Moving Bed (LAMB) dryer
由: Nor Hidayah Kamin
出版: (2018)

Study of nanomaterials and glass beads on rheological properties and lubricity of water based mud
由: Zolkifle, Norasyikin
出版: (2013)

Ilminite and silicon nanoparticles water based mud to enhancing rheological properties and reducing fluid loss problems
由: Ali Adnan, Al Muttairi Hussein
出版: (2021)

Hydraulic performance of membrane bioreactor (MBR) for palm oil mill effluent treatment (POME) under aerobic conditions
由: Lim , Leornard Lik Pueh
出版: (2004)

Surface modification of polyethylene glycol-nano silica using SDS to improve rheological and filtration properties of water-based mud
由: Mohamud, Ismail Katun
出版: (2022)

Gas system cascade analysis framework for optimal design of biogas system
由: Othman, Muhamad Nazrin
出版: (2017)

Optimal design of a solar photovoltaic tracking intergrated system
由: Mansor, Abdullah Sulhi
出版: (2020)

Formulation of a lightweight drilling fluid using biodegradable natural polymers for underbalanced drilling /
由: Lim, Symm Nee
出版: (2015)

Corrosion prevention through performance optimization of biological cathodic protection system
由: Azman, Anis Fitri Afira
出版: (2021)

Optimal design and scheduling of an integrated centralized and decentralized energy generation system
由: Liu, Wen Hui
出版: (2019)

Optimal planning of hybrid power generation system towards low carbon development
由: Ab. Muis, Zarina
出版: (2014)

Characterization and optimization of mix anionic-nonionic reverse micelle system for Amoxicillin extraction
由: Mohamad Aziz, Siti Norazimah
出版: (2013)

A levy flight particle swarm optimizer for machining performances optimization
由: Farhan Kamaruzaman, Anis
出版: (2014)

Process optimization of microwave dried purple sweet potato extract and its stability in aqueous system
由: Mohd. Padzil, Alyani
出版: (2020)

Optimization of municipal solid waste management strategy in Iskandar Malaysia using general algebraic modelling systems
由: Alkali, Habib
出版: (2020)

Optimization of mixed refrigerant compositions for the prico natural gas liquefaction process using hysys optimizer
由: Basharahil, Ahmed Omar
出版: (2018)

The optimization of electric buses in Iskandar Malaysia
由: Segar, Boshkiran
出版: (2019)

Optimization of synthesis and application processes for composite crosslinked chitosan derivatives fly ash for removal of Reactive Red 120 dye / Ibrahim Awad Mohammed
由: Mohammed, Ibrahim Awad
出版: (2023)

Optimization of orthosiphon stamineus-loaded nanostructured lipid carrier using d-optimal mixture design for improved lipolysis activity
由: Suhaimi, Siti Hasyimah
出版: (2017)

Zinc vanadium oxide coupled carbon nitride nanocomposite for photocatalytic carbon dioxide reduction to methanol
由: Mohammed Bafaqeer, Abdullah Salem
出版: (2019)

Optimization and chemical demulsification of crude oil emulsions
由: Nuraini, Mansor
出版: (2012)

Optimization process of binahong extraction and characterization study
由: Sri Murni, Astuti
出版: (2011)

Optimization of roselle seed in supercritical carbon dioxide
由: Wong, Lee Peng
出版: (2019)

Bioprocess optimization for kefiran production by lactobacillus kefiranofaciens
由: Dailin, Daniel Joe
出版: (2016)

Optimization, stability and characterization of face serum formulation
由: Buddeen, Mumtaz M. Sultan Suhai
出版: (2018)

Optimal operating conditions of Eurycoma Longifolia extraction
由: Mohamad, Mardawani
出版: (2013)

Setting a hydraulic production packer: a comparative study on existing plugging methods in highly deviated wells and a proposed conceptual design
由: Mohammad, Rafiq Darwis
出版: (2021)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group