Effect of alumina-formers addition on the isothermal oxidation of TI-AL based intermetallics

Effect of alumina-formers addition on the isothermal oxidation of TI-AL based intermetallics

The main objective of this study is to investigate the effect of adding the alumina former elements on the isothermal oxidation behavior of Ti-Al based intermetallics. High temperature oxidation test was carried out on Ti-Al based intermetallics namely the Ti-48Al-0.5Ag, Ti-48Al-2Cr-1.5Ag and Ti-48A...

Saved in:

書目詳細資料
主要作者:	Tan, Ming Jiun
格式:	Thesis
語言:	English
出版:	2008
主題:	TJ Mechanical engineering and machinery
在線閱讀:	http://eprints.utm.my/id/eprint/9691/1/TanMingJiunMFKM2008.pdf
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Wire electrical discharge machining of Ti-48Al intermetalic alloys using taguchi approach
由: Kamsir, Abdul Sukur
出版: (2006)

Effect of isothermal aging on the corrosion behavior of tin-lead and lead-free solders
由: Asri, Asma Kamarul
出版: (2011)

Effect of Ni3Ti formation on the oxidation kinetics of NiTi shape memory alloys
由: Nawawi, Nazihah
出版: (2014)

Development of ceramic cutting insert of aluminium oxide (Al2O3) and titanium carbide (TiC) for machining steel
由: Isa, Mohd. Akmal
出版: (2007)

Intermetallic compound formation between Sn - 37Pb & Sn - Ag - Cu lead - free solders and immersion silver surface finish
由: Osman, Saliza Azlina
出版: (2008)

The effects of spray atomization by using blended alumina oxide, titanium oxide, and cerium oxide nano particles with diesel fuel in direct injection engine
由: Ali Mohammed Omar Salem, Ba Saleem
出版: (2023)

Effect of nitrogen pressure on Ti/TiAl coating on 304 stainless steel by PVD-DC magnetron sputtering
由: Sabar, Mustafa Muneim
出版: (2013)

Developement of ceramic cutting insert of alumina (Al2O3) and zirconia / zirconium oxide (ZrO2) for turning tool steel
由: Shamsudin, Zuraidy
出版: (2007)

Fabrication of ceramic nozzle made from clay-alumina mixture
由: Rosli, Muhamad Nurizad
出版: (2014)

Characterization And Wear Performance Of Fabricated Alumina Based Cutting Tools
由: Mokhtar, Muhammad Faiz
出版: (2020)

Materials interaction during soldering and isothermal ageing of Sn-Pb and Sn-Ag-Cu solders on electroless Ni/Au surface finish
由: Tai, Siew Fong
出版: (2003)

Fabrication and characteristic study of alumina tool using cold isotatic press
由: Adam, Abdul Aziz
出版: (2014)

The effect of silica and alumina in sol-gel hydroxyapatite coating on stainless steel
由: Rashidi, Nur Syazana
出版: (2011)

Electrodeposition and synthesis of nano alumina nickel composite coating by direct electroplating
由: Mehraban, Saleh
出版: (2011)

Effect of thermal oxidation on corrosion resistance of Ti-8Mo4Nb-2Zr alloy for biomedical application
由: Siti Norsuraya Hussain
出版: (2021)

Ultrasonic machining (USM) of alumina using classical design of experiment (DOE) approach
由: Muhamad, Fairuz
出版: (2001)

Effect of heat treatment on the microstructures and hardness of Ti-48Al-xCr alloys
由: Mohamed Jamil, Fariza
出版: (2012)

Fabricate And Investigate The Performance Of Alumina Based Ceramic Cutting Tool With Different Edge
由: Mat Amin, Mohd Imran
出版: (2018)

Microstructures and properties of Ti-51at.%Ni, Ti-23at.%Nb and Ti-30at.%Ta shape memory alloys fabricated by microwave sintering for biomedical applications
由: Ibrahim, Mustafa Khaleel
出版: (2018)

Effect Of Ni3ti Formation On The Oxidation Kinetics Of Niti Shape Memory Alloys
由: Nawawi, Nazihah
出版: (2014)

Influence of ultrasonic vibration on TiN coated biomedical TI-13Zr-13Nb alloy
由: Abdullah, Arman Shah
出版: (2015)

Develop nanocomposite material of TiO2/Al2O3 using electrophoretic deposition
由: Rahem, Monaf Ali
出版: (2014)

The effect of Ti-6AL-4V surface integrity using zinc coated wire in WEDM
由: Tharazi, Izdihar
出版: (2009)

The effect of fuel additives on performance and emission of four stroke engine / Junaidah Md Saad
由: Md Saad, Junaidah
出版: (2010)

Effect of machining parameters and bismuth addition on al-20%mg2si machinability during dry turning
由: Razavykia, Abbas
出版: (2014)

Analysis of antioxidant additives-biodiesel blends on engine performance and emission characteristics of a diesel engine
由: Mohd Hafiz, Ali
出版: (2021)

The effects of niobium addition on mechanical and physical properties of austempered ductile iron / Siti Khadijah Alias
由: Alias, Siti Khadijah
出版: (2010)

Effect of strontium modification and and AL-TI-B grain refiner on microstructure and properties of cast LM6 alloy
由: Hussain, Fadi Faris
出版: (2010)

Wear performance of alumina based cutting tool when machined with AISI 1045 carbon steel
由: Mazda, Nur Syahirah
出版: (2018)

Hybrid-inspired coolant additive for radiator application
由: Benedict Foo, Jing Siong
出版: (2020)

effect of cerium and barium additions and superheating melt treatment on the morphology and hardness of al-mg2si-cu composite
由: Nordin, Nur Azmah
出版: (2017)

Effect of cerium and barium additions and superheating melt treatment on the morphology and hardness of al-mg2si-cu composite
由: Nordin, Nur Azmah
出版: (2017)

The effect of oxygenated turpentine and alpha pinene oil additives in diesel fuel on the performance, combustion, and emissions in diesel engine
由: Syazwana, Sapee
出版: (2023)

Electrosynthesis of copper oxide supported on amorphous titanum dioxide nanoparticles based catalysts for photocatalytic oxidative desulfurization
由: Che Ku Hitam, Che Ku Nor Liana
出版: (2017)

Wire electro-discharge machining of titanium alloy (TI6AL4V) using brass and zinc coated brass wires
由: Jamal, Siti Khalijah
出版: (2009)

Effects of Ni3Ti (DO24) Precipitates and composition on Ni-based superalloys using molecular dynamics method
由: Goh, Kian Heng
出版: (2013)

Effect of zirconia and chromia on the mechanical and tribology properties of alumina cutting tool
由: Abdul Manap, Muhamad Naim Fahmi
出版: (2021)

The effect of substrate temperature of titanium aluminium nitride coating on titanium alloy (TI-6AL-4V) substrate using PVD method
由: Bahador, Hamid
出版: (2013)

Effects of chromium addition on fatigue crack growth behavior of titanium aluminides
由: Ong, Wei Rex
出版: (2008)

Barrier analysis approach in metal additive manufacturing implementation with environment consideration
由: Lee, Ke Yin
出版: (2022)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group