Kajian ujikaji sifat-sifat mekanik campuran serbuk logam dengan plastik /

Kajian ujikaji sifat-sifat mekanik campuran serbuk logam dengan plastik /

Saved in:

書目詳細資料
主要作者:	Syawaldi
格式:	Thesis 圖書
語言:	Malay
出版:	Bangi : Fakulti Kejuruteraan, Universiti Kebangsaan Malaysia, 1998
主題:	Metal powders > Analysis Aluminium powder
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Kajian sifat reologi bahan suapan yang mengandungi stearin sawit untuk proses pengacuan suntikan logam /
由: Iriany
出版: (2002)

Parameter penyuntikan bagi proses pengacuanan suntikan logam (MIM) menggunakan bahan suapan daripada SS 316L, PEG, PMMA dan asid stearik /
由: Murtadhahadi
出版: (2007)

Colloidal processing and sintering of narrow-size-distribution submicron alumina /
由: Wong, Pomp Meng
出版: (1991)

Effect of particle size distribution on sintering of sub-micron alumina powder compacts /
由: Ma, Jan
出版: (1992)

Pengoptimuman parameter penyuntikan proses pengacuanan suntikan logam menggunakan kaedah Taguchi /
由: Tan, Koon Tatt
出版: (2009)

Kajian sifat reologi bahan pengikat daripada campuran polipropilena, polietilena dan minyak kelapa sawit untuk proses pengacuan suntikan logam /
由: Alfian Hamsi
出版: (1998)

Physical and wear properties of aluminium matrix composite reinforced with PSAC and slag fabricated via powder metallurgy
由: Zamri, Yusoff

Microstructure and properties of metal/ceramic composites based on Ti/TiC produced by combustion synthesis /
由: Farhoudi, Omid
出版: (2007)

Kesan pembebanan serbuk logam terhadap fenomena pemprosesan dalam pengacuan suntikan logam /
由: Muhammad Hussain Ismail
出版: (2002)

Diamond particle distributed in cemented carbide /
由: Authayarat, Waratta
出版: (2007)

Thermomechanical modelling of powder compaction process /
由: Md. Mujibur Rahman
出版: (1998)

Powder compaction, finite element modelling and experimental validation /
由: Ahmad Kamal Ariffin Mohd. Ihsan
出版: (1995)

Characterization of optimal powder loading for metal injection moulding (MTM) / Muhammad Fatah @ Fadullah Abbas
由: Abbas, Muhammad Fatah @ Fadullah
出版: (2005)

Mechanical properties evaluation of tin-based powder metallurgical bearing components /
由: Mohd. Fadzil Jamaludin
出版: (2010)

Hard coating layer formation on plain carbon steel surfaces by powder preplacement and TIG torch melting techniques
由: Sarker, Dyuti
出版: (2010)

Performance evaluation of powder metallurgy tool electrodes in electrical discharge machining of hardened steel /
由: Nik Masmiati Nik Pa
出版: (2006)

Kesan saiz dan bentuk partikel serbuk SS316L terhadap parameter pengacuanan suntikan logam menggunakan rekabentuk eksperimen /
由: Khairur Rijal Jamaludin
出版: (2009)

Characterization and in-vitro activity of powder metallurgy magnesium-zinc/bioglass composite for biomedical applications

Corrosion behaviour on powder metallurgy aluminium matrix composite reinforced with alumina Saffil™ short fibres
由: Normah, Cheman

Mechanically-induced defects in milled CdZnSe nanocrystalline powder
由: Bagudo, Ibrahim Muhammad
出版: (2016)

Fabrication and properties of magnesium-calcium alloy via powder metallurgy technique

Fracture toughness of iron and copper powder compacts using modified diametrical compression test technique
由: Akoredeley, Alabi Abdulmumin
出版: (2018)

Microwave sintering of a tin base alloy /
由: Azrena Haji Abu Bakar
出版: (2005)

Sifat fizikal,mekanik dan terma bagi pengacuan suntikan logam serbuk kuprum berpengisi grafin /
由: Natasha Emira Azaman

Characterization of thermally evaporated silver nanoparticles on graphene oxide coated substrate using hot-wire chemical vapour deposition /
由: Nurul Hazierah Kamaruddin
出版: (2018)

Kelakuan aliran dalam proses pengacuan suntikan logam /
由: Nor Azizah Ma'som
出版: (2007)

The effect of nickel, cobalt and tin on the evolution of microstructural and mechanical properties of Al-Zn-Mg-Cu alloys (7000 series) via casting, powder metallurgy and friction stir processing techniques

Analisis fenomena aliran dalam proses pengacuan suntikan logam /
由: Nor Hafiez Mohamad Nor
出版: (2002)

Synthesis and Characterisation of Bismuth Oxide Powders
由: Mhamat Nasudin, Noorfarizan Nasriah
出版: (2005)

The effect of copper powder addition on spreading characteristics and mechanical behaviour of Sn-Ag-Cu solder /
由: Angellia, Lian Dewi
出版: (2009)

Influence of heat treatment on microstructure, mechanical properties, and corrosion behaviour of LM6 reinforced with copper powder
由: Aljermi, Almukhtar IB. A.
出版: (2021)

Reinforcement of aluminum matrix by carbon nano tubes and nano alumina using powder metallurgy method
由: Ostovan, Farhad
出版: (2015)

Characterising flow properties of fine powders : effect of particle size on the cohesivity of porous and non-porous powders ; flowabilities were assesed using Hausner ratio, cohesion, penetration strength, angle of repose, and fluidisation characteristics /
由: Chan, Ezzat
出版: (1997)

Studies of geopolymerization route for metakaolin geopolymeric materials
由: Liew, Yun Ming

Finite element modelling of bilayer iron powder compaction and evaluation on its relative density distribution using imaging technique
由: Mohd Yusoff, Syamimi
出版: (2022)

Processing behavior of powder/binder mixtures in powder injection molding : binder separation and quick freezing /
由: Rhee, Byung Ohk
出版: (1992)

Fabrication of spectrally selective solar power absorber material via powder metallurgy process /
由: Mohd Zakuan Zabri
出版: (2019)

Effect of chemical modification of eggshells powder filled low density polyetylene composites
由: Siti Shuhadah, Md Saleh

Development od SiC reinforced SnCu and SAC based lead-free solder composite via powder metallurgy route

Sintering study in metal injection molding (MIM) process / Mohd Khuzairy Mohd Yusof
由: Mohd Yusof, Mohd Khuzairy
出版: (2004)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group