Wind turbine constant voltage controller using modified SHEPWM technique
The major challenges in designing the controller for wind turbine are fluctuations of the wind speed and the harmonic contents of the output voltage. The fluctuations of the wind turbine speed results in inconsistency of voltage supplied to the inverter which will affect the harmonic of the outpu...
Saved in:
| 格式: | Thesis |
|---|---|
| 语言: | English |
| 主题: | |
| 在线阅读: | http://dspace.unimap.edu.my:80/xmlui/bitstream/123456789/77060/1/Page%201-24.pdf http://dspace.unimap.edu.my:80/xmlui/bitstream/123456789/77060/2/Full%20text.pdf http://dspace.unimap.edu.my:80/xmlui/bitstream/123456789/77060/4/Muhammad%20Zaid.pdf |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | The major challenges in designing the controller for wind turbine are fluctuations of the wind
speed and the harmonic contents of the output voltage. The fluctuations of the wind turbine
speed results in inconsistency of voltage supplied to the inverter which will affect the harmonic
of the output voltage. Therefore, this research is dedicated to design a controller consists of a
DC/DC boost converter and a DC/AC inverter integrated with the wind turbine system. The
controller plays two important roles. Firstly, the controller has to control the consistency of the
output voltage of the DC/DC boost converter irrespective of the inconsistency of the input
voltage supplied using PI controller. Second, the controller has to generate the firing angles that
giving out lesser harmonic to the single phase DC/AC inverter using the Selective Harmonic
Elimination Pulse Width Modulation (SHEPWM) switching strategy. The overall system has
been designed successfully using MATLAB Simulink software and implemented using real
hardware. The results from both simulation and hardware are collected, analysed and compared.
For boost converter, the output voltage is in constant 50V even though the input voltage supplied
to the boost converter is varies and it is suitable to charge the battery system. For inverter, the
hardware is tested with a resistive load and an inductive load to study the performance of the
controller when dealing with different types of load. From the results obtained from simulation
and hardware, it can be concluded that the designed controller circuit is working well even
though the input voltage supplied to the boost converter varies and the output voltage of inverter
is very low in total harmonic distortion (THD) nearly 3.6% for THD voltage and 2.1% for THD
current |
|---|